Opel Insignia


Debut: 2008
Maker: Opel
Predecessor: Vectra / Signum



 Published on 21 Oct 2008 All rights reserved. 

Stylish new Opel tries to replace Vectra and succeeds Omega at the same time...

I liked the last generation Opel Omega (1993-2003) very much. It was handsome, spacious and great to drive. In other words, a strong rival to BMW 5-Series of the day. Unfortunately, like most other mainstream manufacturers, Opel lost market share to the ever rising premium brands and eventually killed its last rear-drive executive car. The top of the range became Vectra, which was too cheap and small to serve executive customers, of course. As the market size of D-segment (family cars) has been shrinking over the last decade, how to broaden the customer base of Opel has been a key issue. To reintroduce Omega would be too costly. How about moving the Vectra half a step upmarket and give a new name “Insignia” ? If Opel could offer a variety of engines and equipment levels, this car could cover the customers left by both Vectra and Omega, and greatly enhance its sales potential. In fact, Ford has proved this strategy successful with its larger new Mondeo.


Classy looks is a combination of Audi and Infiniti...

In the first sight, Insignia is a vast improvement from Vectra. Its exterior design is both stylish and upmarket, something half Audi and half Infiniti. Its swoopy roofline has some Jaguar XF in it, which appears to limit rear seat head room (we shall see that later). However, Insignia does not look as sporty as Ford Mondeo owing to a rounder and softer profile. Opel’s design chief Mark Adams prefers a softer design theme than his predecessor Martin Smith, who styled Astra and Corsa before moving to Ford and designed Mondeo. It does deliver a lower drag coefficient (0.27), and looks more elegant thanks to the use of extensive chroming throughout its body. Inside, the dashboard design looks quite stylish and inviting. Materials and build quality are at least as good as Mondeo’s perhaps slightly better – although it can’t disgrace a new Volkswagen Golf.
  

Swoopy roofline has negative effect to rear passenger room...

What the Insignia isn’t so great is space efficiency. While its overall length is 50 mm longer than Mondeo, its wheelbase is 113 mm shorter than its rival, or in absolute term, 2737 mm. This explain why it looks large outside yet feels small inside. When the front seats are set to accommodate 6-footers, rear passengers of the same size will find head and knee room unusually cramped by the standard of this class. It feels at least a class smaller than Mondeo, so how can it steal sales from the executive car class ? The lack of space will be even more disappointing if you know how heavy Insignia is – a base 1.6-liter model carries 68 kg more than an equivalent Mondeo, while a flagship 2.8 V6 turbo AWD tips the scale at nearly 1700 kg ! Compare with Vectra, Insignia gains around 140 kg, but those weight did not translate into more interior space, sadly.

Optional 4WD enhances handling, although most customers will stick with FWD...

The Insignia debuts GM’s Epsilon II platform (remark: the one underpinning Saturn Aura and Chevrolet Malibu are Epsilon 1.5, while the old Vectra was Epsilon). As before, the platform rides on strut suspensions up front and multi-link suspensions at the rear, but adaptive damping has been added as option – now even the small Astra can be equipped with this technology, Insignia cannot omit it of course. A control system similar to Astra’s allows the driver to select among sport, normal and comfort driving mode, which alters suspension stiffness, steering weighting as well as throttle response. It also links the suspensions with ESP stability control and 4-wheel-drive system.

Talking about 4-wheel drive, this is a new option to Insignia and even compulsory for powerful models, such as the top turbo diesel (190hp 2.0CDTI) and petrol V6 turbo engine. The 4WD system comes straight from Saab, where it is called “XWD”. It employs a Haldex multi-plate clutch to engage the rear wheels and, in addition, is capable of controlling the torque split between the rear wheels.


Interior stylish and friendly, if no match to Volkswagen standard...

The Insignia offers a really wide range of engines, actually more than we can understand. For such a hefty machine, why does Opel offer it a 115hp 1.6-liter engine ? Even the 140hp 1.8-liter engine will have some difficulties to cope with its load. The most sensible entry-level engine should be the 180hp 1.6 turbo, although it is not available yet. Right now the pick of the range is 220hp 2.0 turbo, which offers plenty of flexibility (thanks to 258 lb-ft of torque) and good refinement (thanks to twin-balancer shafts). It is certainly a smarter choice than the flagship 260hp 2.8 V6 turbo with compulsory 4WD, which is not particular quick and could not justify its high price. Opel needs the V6 only for image purpose.

Diesel engines are big sellers in Europe. Unfortunately, GME’s 2.0-liter CDTI engines are notorious for poor refinement. No mater in 110, 130 or 160hp guise, they produce a lot of old-fashioned vibration in idle and sound coarse at the upper rev range. I just hope the forthcoming 190hp twin-turbo 2.0 diesel will be more refined to match its strong output.


Certainly not as driver-oriented as Mondeo...

On the road, the Insignia drives much in the same way as you would expect. It shows plenty of grip, solidity and stability. Gearchanges are clean and smooth. Power, in case of 2.0 turbo petrol, is abundant and refined. The car tracks straight on highway and damp beautifully over high speed undulations. Switch to Sport mode, the instrument readings turn red (a gimmick) and the suspensions stiffens a little. However, it is still not particularly sporty. Certainly not as driver-delighted as Ford Mondeo. Despite of the use of hydraulic power steering, the steering filters all kinds of signals from the road together with kickbacks. It is also too light and loose to encourage driving confidence. The chassis response is not particularly willing, more grip than balance.

Okay, Insignia is not going to challenge Mondeo for driving excitement. Then how about comfort and refinement ? Seems not too convincing. Ride quality on highway is good, but on rough surfaces it is not as planted as Mondeo. Most disappointing is that it generates a lot of road noise on coarse surfaces. Wind noise from B-pillars is also an issue at cruising speed. In addition to the aforementioned unrefined diesel engines and short of interior space, Insignia has quite a lot of problems to sort before it can match the best class standards, let alone to be a spiritual successor to our beloved Omega. A stylish packaging is not enough.
Verdict: 
 Published on 27 Jul 2009
All rights reserved. 
Insignia OPC

On paper, the OPC has all ingredients to match its target rival - Audi S4...

According to its maker, Opel Insignia OPC - or Vauxhall Insignia VXR - is a match of Audi S4 in performance and chassis sophistication while undercutting its rival by 10 percent. Moreover, it is available in 3 body styles - 4-door saloon, 5-door hatch or estate. Is it that good?

Look at its pretty face, you can easily believe so. Insignia has always been a handsome car. Now with flashy air intakes and exhaust, a drop in ride height and a set of cool alloy wheels that fill the wheel wells fully, the OPC is immediately attractive, more so than the understated Audi S4. Inside, the story is the same. The quality interior of Insignia is enhanced with many alloy-looking accents, a sporty steering wheel and delicious Recaro sport buckets. It's hard to think what can be improved.

Read its mechanical specifications, you will find all the necessary ingredients for a sports sedan - a highly tuned turbocharged V6, a 4WD system with electronic controlled torque vectoring, an adaptive suspensions / throttle mapping / power steering control with 3 selectable modes, and a reworked geometry in front suspensions to cut torque steer. Top speed is regulated at 155 mph. 0-60 mph takes 5.6 seconds. It's not as fast as S4, but given its lower price it should raise some eye brows at Ingolstadt, shouldn't it?


321 lb-ft torque arriving at 5250 rpm explains why it feels slower than its figures suggested...

Unfortunately, the Insignia OPC looks better than it goes. Take the 2.8-liter turbocharged V6 for example, its fundamental is not exactly sophisticated. Unlike Audi or BMW's counterparts, it does not have direct gasoline injection or variable cam phasing at the exhaust valves. It employs a single turbocharger to serve both banks of cylinder - although that turbo has twin-scroll to separate the exhaust flow of both banks - how can it achieve the lowest possible lag? 0.9 bar of boost pressure and a low-back pressure exhaust pretty much max out its potential at 325 horsepower. That sounds good enough, but what about 321 lb-ft of peak torque arriving at 5250 rpm? It explains why the Insignia OPC feels slower than its figures suggested in real world. It feels lazier and heavier than its rival. You need to operate its notchy gearshift frequently to keep its engine at the high and narrow power band.

Yes, at 1735 kg it is really a heavyweight fighter. To cope with that, OPC has upgraded its front brakes to Brembo 355 mm cross-drilled ventilated discs with 4-piston calipers. These "dual-cast" discs have aluminum core to reduce unsprung mass. Accompany with the stronger brakes are Pirelli P Zero rubbers, measuring 245/40ZR19 standard or 255/35ZR20 optional. Transmitting the engine power to the tires is the latest Haldex 4-wheel drive system. Apart from an electromagnetic multiplate clutch facilitating front/rear torque split, it has added an active LSD at the rear axle. This system has been applied to Saab 9-3 Turbo X (previously known as XWD). It is capable of directing the desired amount of torque to individual rear wheels so to alter steering attitude.


HiPerStrut suspensions largely killed torque steer, but chassis lacks interaction with driver...

The suspensions of OPC have been heavily modified. Its HiPerStrut front suspensions are designed to reduce King-pin inclination hence torque steer. This sounds similar to Ford's RevoKnuckle or Renault's "Double-axis" suspension. Nevertheless, HiPerStrut can reduce King-pin offset by just one-third, from 67mm to 44mm, so it is not as effective as others. Ride height of both front and rear suspensions have been dropped by 10mm compared with SRi (or 25mm compared with Insignia with standard suspension). Springs are slightly stiffer. The FlexRide adaptive damping has been recalibrated. Now it offers 3 modes - Standard, Sport and OPC (or VXR). Frankly, Sport is actually not too sport, as it stiffens the damping just a little. For meaningful improvement to handling you need to engage the OPC mode. This will switch to the stiffest suspension setting, reduce steering assistance and speed up throttle response. Moreover, it will turn the instrument backlight to red, reminding you that it's time for thrill.

You definitely need it, because otherwise the OPC does not engage its driver very well. Yes, it provides bags of traction and grip. Braking is also satisfying. The steering is accurate and well weighted. The ride in OPC mode is firm but composed. It is a comfortable high-speed cruiser. However, it does not feel very exciting to drive. Its exhaust note is boring. Its handling lacks interaction with the driver. Its steering is still devoid of information. Its 4WD system does not respond to throttle steering. It just grip and go according to the line in its brain, not according to your wish. In addition to the aforementioned peaky power delivery and poor gearshift, it's hard to persuade people to go from Audi S4 or BMW 335i to this car. Even though it is cheaper to purchase, this advantage is largely offset by its higher fuel consumption and emission tax.
Verdict:
 Published on 27 May 2010
All rights reserved. 
Buick Regal

Insignia-based Regal is easily the most competitive Buick for years...

The nameplate Buick Regal would not have been surviving if not the strong demand from China. While Buick is the sunset marque at its home country, it enjoys far greater commercial success in China, where people have no idea about its sagging fortune. GM China did very well in marketing, keeping the last generation Regal surviving four years longer in China than in the US. When the American design finally retired in 2008, GM China turned to GM Europe for help. The latter generously lent its brand new Opel Insignia, rebadged it as Buick Regal and transferred production to China. Boosted by unprecedented style, technology and quality, the car immediately became Buick's best seller there.

This year, Buick Regal returns to the North America market. Like the Chinese version, it employs slightly softer suspension setting than the European version to please American customers. But the engines they offer are somewhat different.

Chinese car:
  • 147hp 2.0 DVVT
  • 170hp 2.4 DVVT
  • 180hp 1.6 Turbo
  • 220hp 2.0 DI Turbo
American car:
  • 182hp 2.4 DI
  • 220hp 2.0 DI Turbo
Moreover, the American car has the option of adaptive damping and IDCS (Interactive Driver Control System), both are absent on the Chinese car. In America, Regal will sit below LaCrosse as the entry-level model of Buick. Although it is easily the most competitive Buick for years, it is not expected to set any sales record. At the moment, it will be imported directly from Germany. If GM doesn't change its mind, expect to see its production localized in Canada from late next year.
Verdict:
 Published on 27 Nov 2011 All rights reserved. 
Buick Regal GS


It is meaningless to say "this is the first performance Buick since…" The current Regal has never been a true Buick, but an Opel Insignia happened to wear an American nameplate. For the same reason, Regal GS is not a performance Buick, but an Opel Insignia OPC happened to arrive on the shore of America.

Well, you may argue that the Regal GS uses a different engine. Instead of the heavyweight 325 hp turbocharged V6, it gets a more sensible 2-liter turbo with 270 horses and 295 lbft of torque. It also lacks the OPC's all-wheel drive system, so all power goes through the front wheels to the tarmac. Nevertheless, the rest of the car is all OPC. For example, its front axle is suspended on sophisticated Hiper struts to reduce torque steer. Its suspensions get the service of CDC continuous adaptive damping. It employs the same 6-speed manual gearbox. It runs the same monster-size 20-inch wheels and 255/35 rubbers. Its front brakes get the service of Brembo 4-piston calipers. Also, the Interactive Drive Control System is carried over from the OPC. IDCS alters suspension hardness, steering weighting and throttle response through four modes – Normal, Tour, Sport and GS. The last mode is the equivalent to the OPC mode on Opel. Its activation not only selects the most extreme settings but also turns the instruments to red.

Despite of the rationalization, this car still weighs close to 1.7 ton. It takes about 6 and a half seconds to go from rest to 60 mph, which could be embarrassed by a Toyota Camry V6. However, the GS does outperform the Camry in the twisty. Its handling is typical European, with excellent body control, roadholding and braking. On the downside, it shares the problems with OPC, namely, notchy gearshift, heavy yet lifeless steering and a general lack of driver involvement. It fails to translate its capability into fun, sadly.

More problematic is pricing. Starting at US$35,000 and easily topping US$40K with options, it is no cheaper than a new BMW 328i, which is faster, cleaner, better built and far more fun to drive. I wonder how many people will choose it.
Verdict:
Specifications





Year
Layout
Chassis
Body
Length / width / height
Wheelbase
Engine
Capacity
Valve gears
Induction
Other engine features
Max power
Max torque
Transmission
Suspension layout

Suspension features
Tires
Kerb weight
Top speed
0-60 mph (sec)
0-100 mph (sec)
Insignia 1.6 Turbo
2008
Front-engined, FWD
Steel monocoque
Mainly steel
4830 / 1858 / 1498 mm
2737 mm
Inline-4
1598 cc
DOHC 16 valves
Turbo
-
180 hp
170 lbft
6-speed manual
F: strut
R: multi-link
-
225/55R17
1470 kg (est)
140 mph (c)
8.9 (c)
-
Insignia 2.0CDTi
2008
Front-engined, FWD
Steel monocoque
Mainly steel
4830 / 1858 / 1498 mm
2737 mm
Inline-4, diesel
1956 cc
DOHC 16 valves
VTG turbo
CDI
160 hp
258 lbft
6-speed manual
F: strut
R: multi-link
-
225/55R17
1560 kg (est)
135 mph (c)
9.1*
25.3*
Insignia 2.0CDTi biturbo
2011
Front-engined, FWD
Steel monocoque
Mainly steel
4830 / 1858 / 1498 mm
2737 mm
Inline-4, diesel
1956 cc
DOHC 16 valves
Sequential twin-turbo
CDI
195 hp
295 lbft
6-speed manual
F: strut
R: multi-link
Adaptive damping
225/55R17
1660 kg (est)
143 mph (c)
8.2 (c)
-




Performance tested by: *Autocar





Year
Layout
Chassis
Body
Length / width / height
Wheelbase
Engine
Capacity
Valve gears
Induction
Other engine features
Max power
Max torque
Transmission
Suspension layout

Suspension features
Tires
Kerb weight
Top speed
0-60 mph (sec)
0-100 mph (sec)
Insignia 2.0 Turbo
2008
Front-engined, FWD
Steel monocoque
Mainly steel
4830 / 1858 / 1498 mm
2737 mm
Inline-4
1998 cc
DOHC 16 valves, VVT
Turbo
DI
220 hp
258 lbft
6-speed manual
F: strut
R: multi-link
Adaptive damping
225/55R17
1560 kg (est)
155 mph (limited)
7.2 (c) / 6.8*
18.3*
Insignia 2.8 Turbo
2008
Front-engined, 4WD
Steel monocoque
Mainly steel
4830 / 1858 / 1498 mm
2737 mm
V6, 60-degree
2792 cc
DOHC 24 valves, VVT
Turbo
-
260 hp
258 lbft
6-speed manual
F: strut
R: multi-link
Adaptive damping
225/55R17
1680 kg (est)
155 mph (limited)
6.7 (c)
-
Insignia OPC
2009
Front-engined, 4WD
Steel monocoque
Mainly steel
4830 / 1858 / 1498 mm
2737 mm
V6, 60-degree
2792 cc
DOHC 24 valves, VVT
Turbo
-
325 hp / 5250 rpm
321 lbft / 5250 rpm
6-speed manual
F: HiPer strut
R: multi-link
Adaptive damping
255/35ZR20
1735 kg
155 mph (limited)
5.6 (c)
-




Performance tested by: *C&D on Buick Regal





Year
Layout
Chassis
Body
Length / width / height
Wheelbase
Engine
Capacity
Valve gears
Induction
Other engine features
Max power
Max torque
Transmission

Suspension layout

Suspension features
Tires
Kerb weight
Top speed
0-60 mph (sec)

0-100 mph (sec)

Buick Regal GS
2011
Front-engined, FWD
Steel monocoque
Mainly steel
4830 / 1858 / 1480 mm
2737 mm
Inline-4
1998 cc
DOHC 16 valves, VVT
Turbo
DI
270 hp / 5300 rpm
295 lbft / 2400 rpm
6-speed manual or
6-speed automatic
F: HiPer strut
R: multi-link
Adaptive damping
255/35ZR20
1680 kg
155 mph (limited)
6M: 6.2* / 6.2**
6A: 6.4*
6M: 16.1* / 17.4**
6A: 16.6*
























































Performance tested by: *C&D, **MT






    Copyright© 1997-2011 by Mark Wan @ AutoZine